ivanp
Active Member
Posts: 40
|
Post by ivanp on Oct 25, 2009 19:51:11 GMT
Just about to take a cut and the workshop plunges into darkness with a bang from the wm16.
the input fuse to the controller has blown . has anyone any experience of what could be wrong and are the electrics temperamental on these far Eastern machines. The motor looks ok , no burnt wires but if the controller has gone what are my options ie can it be replaced with reliable one.
thanks for looking Ivan
|
|
ivanp
Active Member
Posts: 40
|
Post by ivanp on Oct 26, 2009 20:57:52 GMT
an update the controller appears to be working , or at least it controls a light bulb in varying degrees of brightness
The com on the armature has an open circuit on it somewhere .
I am going to try and fix that before i order a new motor
|
|
ivanp
Active Member
Posts: 40
|
Post by ivanp on Nov 11, 2009 19:11:49 GMT
Had to order a new motor Good service from Warco
Machine now working
|
|