|
Post by baxterwood on Apr 26, 2015 18:27:06 GMT
Hi everyone,
Don't know if anyone can help.
Does anyone know what is the specification (length/diameter/SWG etc.) of the bogie springs for the Martin Evans 'Springbok' B1, I thought I had all the drawings but checked and I have them all but the one covering the bogie details - sods law!
Regards, Peter
|
|
gwrfan
Part of the e-furniture
Posts: 456
|
Post by gwrfan on Apr 26, 2015 19:07:02 GMT
Hi everyone, Don't know if anyone can help. Does anyone know what is the specification (length/diameter/SWG etc.) of the bogie springs for the Martin Evans 'Springbok' B1, I thought I had all the drawings but checked and I have them all but the one covering the bogie details - sods law! Regards, Peter Hi Peter, Model Engineer 17 March 1960, page 328. All he shows is 'Side Control spring, 18 Gauge, 13/64" bore' (if you're lucky!). The actual bogie springs are 22 Gauge, 9/64" bore. Hope this helps Geoff
|
|