|
Post by terry1956 on Aug 29, 2015 10:18:09 GMT
hi chaps. well I have spend weeks reading how to set up valves and they are all like video manuals to me. I am sure that if you know how its an easy job. But I don't know how. So this is a big cry for help. is there anyone out there who is able and willing to go through setting up my B1 valve settings and get the motion running on air. I am based in the S/W but willing to travel up to midlands or London or further south. please PM me if able to help. thanks. michael
|
|
|
Post by ejparrott on Sept 7, 2015 10:57:52 GMT
How far have you got? What have you done so far?
|
|
|
Post by suctionhose on Sept 8, 2015 5:49:46 GMT
Steps: 1. Check valve travel in full gear is as per design, both sides.
2. Precisely find and mark dead centres.
3. Check valve stays stationary from full forward to full reverse.
4. Adjust valve on spindle to achieve equal openings (leads) at each dead centre.
5. If the above is still confusing proceed with obtaining help!
|
|
pault
Elder Statesman
Posts: 1,496
|
Post by pault on Sept 8, 2015 16:04:20 GMT
between 2 and 3 check return crank setting
|
|
|
Post by suctionhose on Sept 8, 2015 20:59:16 GMT
between 2 and 3 check return crank setting Return crank throw, yes. Although this is verified by step 1.
|
|