|
Post by ejparrott on Feb 11, 2016 12:07:03 GMT
Adam!!
Our 7.25" Scot has one, so someone at some time has supplied them
|
|
|
Post by Cro on Feb 11, 2016 12:23:32 GMT
All I need is a drawing...Happy to help if you can find the works drawings
|
|
|
Post by Cro on Feb 11, 2016 13:52:15 GMT
I don't know of anyone who has done it in 5", I will see if I can find any info
|
|
dfh
Hi-poster
Posts: 197
|
Post by dfh on Feb 11, 2016 14:23:53 GMT
All I need is a drawing...Happy to help if you can find the works drawings Adam not sure if its any help in this case, but Don Young published a drawing for a working 5" one (his drawing)as used on the Horwich Crab, which I believe is the same as used on early Scots, the drawing appeared in Locomotives Large and Small No 23. Could possibly do you a copy of the drawing if you want. Put me down for one if you get round to do doing them, a dummy will do. David
|
|
|
Post by Cro on Feb 11, 2016 15:15:13 GMT
David,
Potentially useful if nothing else can be obtained, I like to try and stick with the works drawings approach if possible as I can get every little bit of detail that way but I can always it to drawings if need be.
Adam
|
|
|
Post by 4fbuilder on Feb 13, 2016 12:20:24 GMT
Good morning all,
I have a copy of a drawing that appeared in a past copy of Midland Record, the drawing is for a left hand drive locomotive ejector should anyone be interested.
Regards,
Bob
|
|
|
Post by Cro on Feb 13, 2016 12:29:29 GMT
Good morning all, I have a copy of a drawing that appeared in a past copy of Midland Record, the drawing is for a left hand drive locomotive ejector should anyone be interested. Regards, Bob Bob feel free to drop me a message I'd be interested to see the drawing. Adam
|
|