|
Post by terrier060 on Mar 31, 2024 0:11:45 GMT
The roof is quite large, about 4" long x 9" wide. The shape is shown in the drawing on my page 33. Maybe it is one to be made the old way and soldered together? Ed
|
|
|
Post by steamer5 on Mar 31, 2024 3:59:56 GMT
Hi Ed, Have a hunt on YouTube re using 3D printer pressing, from what I’ve seen it looks like they hold up pretty well. Guys in a commercial environment doing limited runs are having pretty good success …. 6 mm aluminum 90 degree bends etc.
Cheers Kerrin
|
|
|
Post by terrier060 on Apr 6, 2024 22:06:41 GMT
Thanks Kerrin, I will do that. We had our first run on Tuesday. Our open day went well with queues. My hunslet ran well after its winter break. No trouble with the injectors which I am always nervous about after a long period in the shed. They like the cold water which you get this time of year!
|
|