milky
Seasoned Member
Posts: 120
|
Post by milky on Mar 4, 2018 10:14:45 GMT
Hi Milky I'm afraid I can't answer that one but when I ring in with the order I can ask the question. What length do you want? Bob. It looks like i can't come up with a definitive answer as yet, so discount my idea. When it comes to purchase though i shall follow your lead and see if anyone wants to involve themselves in a bulk buy. Milky
|
|
dscott
Elder Statesman
Posts: 2,438
|
Post by dscott on Mar 5, 2018 2:32:42 GMT
Hi Bob,
My current batch are 3/8 long but 1/2 inch may suite people better. They are the correct ones for Bufferbeams and look great near 1/16 ones making them appear smaller!
Thanks again.
David. not sleeping in the cold!!
|
|
|
Post by 92220 on Mar 10, 2018 19:05:15 GMT
Hi everybody who has ordered rivets.
The rivets are here and packaged up. I've sent a PM to everyone to get your addresses, so I can send the packages out.
Bob.
|
|
|
Post by roger the dodger on Mar 20, 2018 21:08:57 GMT
Don't forget that the rivet counters will make sure you send them exactly the correct quantity. Unhelpfully! Chris. Well I got mine today. The rivet counters would be very happy with a generous 100+. Thanks Bob for your efforts.
|
|
|
Post by 92220 on Mar 20, 2018 23:26:46 GMT
Hi Roger.
Sorry Roger. I'm annoyed that you only got them today. I posted them last week 1st Class. You should have got them around Thursday last week. Typical Royal Mail 1st Class service!!!
Bob.
|
|
|
Post by 92220 on Mar 24, 2018 9:21:57 GMT
Hi folks.
If there is anyone who would like some of these rivets, I have 400 left. I've had 2 people back out after ordering for them and so those rivets are now available at £5.79 per 100 plus 65p postage to you.
Bob
|
|
dscott
Elder Statesman
Posts: 2,438
|
Post by dscott on Mar 24, 2018 23:51:42 GMT
Dear Bob, Yes if no one wants them as I have so many bits of T section to attach to various cabs and bunkers! Best regards. David.
|
|
|
Post by 92220 on Mar 25, 2018 9:00:48 GMT
Hi David.
Sent you a PM.
Cheers
|
|
|
Post by 92220 on Mar 31, 2018 16:25:49 GMT
Hello 92220, I would be interested in buying 250 rivets (300 if a round number is easier). Thanks, 4303 Hi.
Sorry I don't know your name. I've got your rivets here ready to post. I've sent you a couple of PMs but not had any replies. Perhaps you haven't seen them. PM me with your address and I can see about getting them to you.
Bob.
|
|
|
Post by simplyloco on Aug 29, 2018 16:42:44 GMT
Just got a reply back from the rivet supplier:- If we can get an order together for 1000 rivets, the cost would be £8.19 per 100 plus postage to you. If we can get an order together for 2000 rivets, the cost comes down to £6.20 per 100 rivets. The rivets are in stock too, so minimum wait. I'm just waiting now, for the head radius to be able to get a ball bearing to make the rivet snaps. If anyone is interested, PM me. I'm aiming to place an order sometime first week in March. Bob. Hi Bob. You did a great job on your rivet procurement. I asked the same supplier for some rivets. Here is the answer: 500 quantity of 3/64" shank diameter x 5/32" long under the head length snap/round head mild steel solid rivets shape to BS641 table 1 see www.sapphireproducts.co.uk/641t1.htm@ £16.00/100 from current stock add £3.25 for 1st class postage add VAT I am going to this other supplier at £4.00/100. If I buy 1000 they are £3.30/100. John www.ebay.co.uk/itm/3-64-1-19-1-20-X-315-8mm-Steel-Round-Head-Solid-Rivet-1000-pcs/331878800637?hash=item4d45849cfd:g:JQcAAOxyqUpQ8wt1
|
|
|
Post by 92220 on Aug 29, 2018 19:20:01 GMT
Hi John. That's a very good rate for a sensible quantity. Well done!
Bob.
|
|