|
Post by Deleted on Aug 23, 2014 16:26:34 GMT
|
|
|
Post by marshall5 on Aug 23, 2014 19:05:53 GMT
I assume it failed because the steam water pump didn't work thus no 2nd method of feeding the boiler. I can't understand why the chap hasn't had it re-tested after fitting the injector. Ray.
|
|
jackrae
Elder Statesman
Posts: 1,333
|
Post by jackrae on Aug 23, 2014 19:18:19 GMT
It looks as if lots of the fittings are soft soldered. Wonder how much further such solder was used.
|
|
uuu
Elder Statesman
your message here...
Posts: 2,808
|
Post by uuu on Aug 23, 2014 19:30:44 GMT
Various other items in the picture: Another boiler (marine?) to the left An old fashioned (Rocket-like) chimney and smokebox on the right The edge of another loco frame A ceramic burner assembly.
Trying to figure out if this says anything
Wilf
|
|
|
Post by digger on Aug 23, 2014 20:28:27 GMT
WNTWBP
Figure that out!
Digger
|
|
Tony K
Elder Statesman
Posts: 1,573
|
Post by Tony K on Aug 24, 2014 10:31:41 GMT
WNTWBP Figure that out! Digger VMA
|
|