|
Post by Garry Coles on May 25, 2018 7:48:24 GMT
Post Options Post by Garry Coles on a few seconds ago Hi Does anybody now where to buy involute cutters in module 3 or 8DP pressure angle 20 degrees. Thanks Garry
|
|
|
Post by 92220 on May 26, 2018 16:23:16 GMT
Hi Garry.
I was curious so Googled your spec:- involute cutters in module 3 or 8DP pressure angle 20 degrees UK
Lots came up. It looks as if RDG Tools do a whole range of involute cutters and it looks as if your spec is included, though I know nothing about gear cutting, so may be mistaken.
Whenever I want something and don't know where to get it, I always check Google, and type the question in in a couple of different ways and different sites come up.
Bob.
|
|
|
Post by ettingtonliam on May 27, 2018 6:28:01 GMT
Gary I'll have a look through my collection later on. Which numbers from the set do you need? Does it have to be 20 degrees PA?
I notice that Home and Workshop Machinery are advertising used DP and Modular cutters at £20 each.
Richard
|
|
|
Post by ettingtonliam on May 29, 2018 10:48:07 GMT
Gary If you are still looking for gear cutters, I have an 8DP No. 6 cutter, 17-21 tooth, probably 14.5 PA. I also have 3 off MOD3 cutters, one for 12 -13 teeth, one for 26 -34 teeth and one for 35-54 teeth. I don't know what PA these are, but I don't even know if Modular cutters changed from 14.5 to 20 degrees at the same time as DP cutters. What are you going to make with these, and in what material?
Richard
|
|