|
|
Post by steamer5 on Sept 23, 2019 21:34:29 GMT
Hi Pete,
Had a bit of a play & it sure looks great.
Anybody wanting a iPhone/ iPad version.....
O-Ring Master by GE MAO RUBBER INDUSTRIAL CO., LTD.
Hmmm had hoped it would give a link.....sure you can figure it out!
Cheers Kerrin
|
|
|
|
Post by Deleted on Sept 23, 2019 21:40:20 GMT
Hi Pete, Had a bit of a play & it sure looks great. Anybody wanting a iPhone/ iPad version..... O-Ring Master by GE MAO RUBBER INDUSTRIAL CO., LTD. Hmmm had hoped it would give a link.....sure you can figure it out! Cheers Kerrin Any accolade for the discovery of this app belongs to Tony (atgordon) who introduced it to me. Thank you Tony... Pete |
|
|
|
Post by Roger on Sept 23, 2019 21:50:11 GMT
To be honest, I'm not sure why you need an App or tables for 'O' ring selection. All they're doing is a trivial calculation based on the compression of the 'O' ring section which is probably going to be 15% for static and 10% for dynamic applications. All you need is that figure and to choose the nearest ID exactly the same or slightly less than the inside diameter. That really is all there is to it!
|
|
|
|
Post by steamer5 on Sept 23, 2019 21:55:57 GMT
Roger,
Your age is showing! (I can’t talk!) you know in this day & age if you haven’t got the app you just aren’t with It! 😂😂😂😂
You are most likely right though. As Pete has shown it gives you widths / depths of grooves which, for me at least, was a hit & miss affair so the app helps out & hopefully avoids another part in the scrapbin! ( although the elves might get a bit upset as they will miss out on shinny things)
Cheers Kerrin
|
|
