|
Post by simplyloco on Jun 11, 2020 11:27:14 GMT
This gadget was on the roof of the motorhome. The dish had been removed long ago, there is no control box, and it wasn't connected to anything so I removed it. It has two Bosch 18v motors and two absolutely lovely worms in it. I have to find a use for it, so any suggestions? John Edit. I just looked them up and they are wiper motors: £150 each!
|
|
kipford
Statesman
Building a Don Young 5" Gauge Aspinall Class 27
Posts: 566
|
Post by kipford on Jun 11, 2020 12:29:46 GMT
John If you have a mill, power feeds for the table. Dave
|
|
|
Post by simplyloco on Jun 11, 2020 13:07:29 GMT
John If you have a mill, power feeds for the table. Dave Hi Dave, that's a great idea which I would use if I didn't already have XY power feeds! John
|
|
|
Post by delaplume on Jun 11, 2020 13:40:02 GMT
Motorising a turnover stand ??
|
|
uuu
Elder Statesman
your message here...
Posts: 2,807
|
Post by uuu on Jun 11, 2020 13:40:33 GMT
A telescope mount.
Wilf
|
|
|
Post by simplyloco on Jun 11, 2020 13:47:43 GMT
That 's a great idea! With the right control box it could be a automatic Equatorial mount! John
|
|
|
Post by simplyloco on Jun 11, 2020 13:48:22 GMT
Motorising a turnover stand ?? Good idea, but perhaps a bit OTT? John
|
|
don9f
Statesman
Les Warnett 9F, Martin Evans “Jinty”, a part built “Austin 7” and now a part built Springbok B1.
Posts: 960
|
Post by don9f on Jun 11, 2020 18:57:05 GMT
I was thinking along similar lines because I’d recently seen something on Youtube that “tracked” the International Space Station (not sure why!). Cheers Don
|
|
|
Post by cplmickey on Jun 11, 2020 21:14:35 GMT
It looks just the sort of thing we're looking for to automate our crossing barrier at the track. Ian
|
|
|
Post by springcrocus on Jun 11, 2020 21:40:33 GMT
Just flog them on eBay and put the money to something useful. Travelling workshop, maybe?
Regards, Steve
|
|
dscott
Elder Statesman
Posts: 2,437
|
Post by dscott on Jun 11, 2020 23:34:59 GMT
Motorised Lifting table saves all that foot pumping. Just replace it with screws or build one!
I have 2 Disabled Buggy gearboxes that one is destined to go on a bandsaw for metal.
David and Lily.
|
|