Post by silverfox on Jun 14, 2020 14:06:30 GMT
Getting to the stage where they will be needed
looking up various site from
Get Doug Hewsons book ( which isnt in his catalogue, but a very breif description of what to do is)
through the basic .do this, do that and done answers ( usaully from someone who does it day in day out and expects a first timer to understand with the limited input)
To use sand over a alladin stove
So what i can gather is
Get annealed steel and build the spring heat to red quench in cooking oil polish top leaf? reheat to blue, quench again temper at 385 degrees
A small note in Dougs Catalogue
to
as above but heat individual leaves, quench and put in the preheated sand He also goes on bour reheating if not rightand he uses tufnol
this on this site
www.jsbmodelrestorations.com/?p=2383
So who does what?
looking up various site from
Get Doug Hewsons book ( which isnt in his catalogue, but a very breif description of what to do is)
through the basic .do this, do that and done answers ( usaully from someone who does it day in day out and expects a first timer to understand with the limited input)
To use sand over a alladin stove
So what i can gather is
Get annealed steel and build the spring heat to red quench in cooking oil polish top leaf? reheat to blue, quench again temper at 385 degrees
A small note in Dougs Catalogue
to
as above but heat individual leaves, quench and put in the preheated sand He also goes on bour reheating if not rightand he uses tufnol
this on this site
www.jsbmodelrestorations.com/?p=2383
So who does what?
