tigermoth
Seasoned Member
Birthday 27 Aug 1941
Posts: 141
|
Post by tigermoth on Jul 11, 2020 21:52:39 GMT
Hi All.
Wonder if anyone can help on this.
I part built a King in the late 70s early 80s but had to sell it to someone at Bae Brough who then sold it through a clearing house.
Would like to find it again, it was to Kennions plans with a completed tender with a working water scoop/brakes/tool box lids and a works plate that I had drafted for Kenions to get cast, they gave me the first one for all the work I had done.
The engine had been run on air, the boiler was complete and tested, smokebox was fitted, engine was in one packing case and the tender was in another.
Any help in finding this would be much appreciated by an oap.
Thanks.
Norman.
|
|
Midland
Elder Statesman
Posts: 1,870
|
Post by Midland on Jul 13, 2020 20:16:55 GMT
Norman Good luck. Mike Palmer has his ear to the ground and might have a whisper. I have sent you a pm to help elsewhere. Cheers David aka Midland
|
|