wilson
Active Member
Posts: 17
|
Post by wilson on Aug 3, 2020 19:38:33 GMT
Hey, during the last weeks i builded a power reverse for Baker steering....some bars are still missing but im happy with function. At the moment its not possible to change the filling, but if the reverser is finished it would be possible... youtu.be/wB33v5QYdREBest Regards Wilson
|
|
|
Post by rogsteam1959 on Aug 3, 2020 20:41:06 GMT
Your 611?
|
|
wilson
Active Member
Posts: 17
|
Post by wilson on Aug 4, 2020 4:15:31 GMT
Hey Rogsteam,
yes...
|
|
|
Post by suctionhose on Aug 4, 2020 9:29:47 GMT
Will you be running it on pressurised water from the boiler?
|
|
wilson
Active Member
Posts: 17
|
Post by wilson on Aug 4, 2020 10:32:41 GMT
Hi,
no by steam, but it's an Option , works also good by a loco of a friend.
Regards
Wilson
|
|
|
Post by ettingtonliam on Aug 4, 2020 18:31:12 GMT
Does it just go from full forward gear to full reverse gear, or can you control the cut-off?
|
|
wilson
Active Member
Posts: 17
|
Post by wilson on Aug 4, 2020 18:40:27 GMT
Hi,
yes, now, after all missing bars and lever are finished, sure you can controll the cut off. But i dont have footage about it...mayby later...
Regards
Wilson
|
|