What is CTS?

[merlin]

Hi,

I have an engineering drawing where a dimension referring to a radius or diameter.
I gives '30 TO RAD CTS' Can someone tell me what the acronym CTS stands for.

Regards, Brian.

I managed to track down the guy who did the original drawing and CTS is a mistake it should be CTRS

ie:
CTR = Centre
CTRS = Centres

Drawing now modified!

Thanks for your help.

Regards, Brian.

[Nexuas]

I believe it is "check to suit" i.e. It should be this, but check where it fits to make sure there will not be any problems and adjust to suit...

I maybe wrong!!!

[Laurie_B]

I think CTS might mean 'centres',for example on an engineering drawing you might see a dimension given between centres (i.e.between centre lines).....but I maybe be wrong as well!