4303
Active Member
Posts: 44
|
Post by 4303 on Jan 26, 2009 14:26:04 GMT
Hi, Does anyone know if flanged plate sets are available for the large prairie and, if so, from whom? I've called all the usual suspects and the most common reply is "What's that?". With the weather as cold as it is it seemed like a good idea to do the boiler making now and be warm into the bargain! Any suggestions or leads would be greatly welcomed.
|
|
|
Post by Andy Clark on Jan 26, 2009 15:35:48 GMT
Hi, Does anyone know if flanged plate sets are available for the large prairie and, if so, from whom? I've called all the usual suspects and the most common reply is "What's that?". With the weather as cold as it is it seemed like a good idea to do the boiler making now and be warm into the bargain! Any suggestions or leads would be greatly welcomed. Once upon a time Reeves provided a full boiler kit including all the flanged plates. I reckon it's worth a call to Geoff who will know what happened to the formers etc after the receivership Andy
|
|
4303
Active Member
Posts: 44
|
Post by 4303 on Jan 28, 2009 12:57:25 GMT
Hi Andy, Yes, Reeves no longer produce flanged plates. I heard that Geoff Brannigan used to do their boilers for them but has left. Do you know of a contact number or email for him please? It doesn't seem to be a popular one with the established boiler makers.
|
|
Alan
Part of the e-furniture
Posts: 287
|
Post by Alan on Jan 28, 2009 21:19:29 GMT
george brannigan did some of reeves boilers. He trades as GB boilers and advertises in Model engineer
Alan
|
|
|
Post by baggo on Jan 28, 2009 21:38:51 GMT
Phone number given in ME is 02476 733461 or 07817 269164 (mobile)
|
|