davey
Active Member
Posts: 25
|
Post by davey on Jul 4, 2012 19:55:31 GMT
Ok i am a little bit dim, does any one know the correct sizes including tpi for the valves on a winson, to start with i am replacing the 3 clack valves,and the bottom drain valve.
|
|
|
|
Post by gwr1400 on Mar 8, 2014 19:51:29 GMT
Hi ,
the valves on a 1400are as follows all clack valves are 5/16x32TPI.
The blow down valve and guage glass fittings are 3/8x32TPI.
I hope this helps.
Kind regards GWR 1400
|
|
