|
|
Post by mike 1451 on Nov 23, 2012 21:13:58 GMT
Hi
can anyone help,i recently purchased a winson 14xx from Mike at Station rd Steam ,i have all the paper work for the kits but not the operating instructions, if someone has a copy and could e-mail to me would be much appreciated
e-mail address: mike.lancashire@dsl.pipex.com
many thanks regards Mike
|
|
Jason
E-xcellent poster
Posts: 204
|
Post by Jason on Nov 23, 2012 21:45:15 GMT
Mike,
Do you require the operating instructions due to being new to firing an engine, if so I’d recommend joining a local club or society and get members to assist you in firing and steaming the engine, far better than any manual.
Are you in the UK?
Jason
|
|
|
|
Post by mike 1451 on Nov 23, 2012 23:43:37 GMT
Hi Jason
yes i intend to join a club next year ,there is one at chelmsford essex about 20 minutes away, it talks about the copy of the operating instructions at the end of kit 12 ,so if i could get hold of a copy it would help me to understand the running and firing of the engine before joining the club .i have built three roundhouse 16mm kits and djb coal fired conversion of an accucraft engine so i have a insite into the workings of the much smaller gauge
regards Mike
|
|
Jason
E-xcellent poster
Posts: 204
|
Post by Jason on Nov 24, 2012 10:22:07 GMT
|
|
|
|
Post by mike 1451 on Nov 24, 2012 12:49:10 GMT
Jason
many thanks ,i have down-loaded the article which does give me some good tips
Mike
|
|
