dc309
Seasoned Member
Posts: 146
|
Post by dc309 on May 9, 2015 16:29:27 GMT
Hi all, I haven't done much of late with the Juliet or anything model engineering'y for ages. I had a few hours spare this afternoon so decided to make a small project that could be done in the timescale. I came up with a small oscillating design from Steve's Workshop. I had a scout around my scrap and 'off cut' box and found everything I needed to make one - It took me about 3 hours to get this far, and it does run! Just needs a clean up and painting I got the design from Steve's Workshop - www.steves-workshop.co.uk/steammodels/simpleoscil/simpleoscil.htmRegards, DC309
|
|
|
Post by runner42 on May 17, 2015 23:04:20 GMT
A good start, just needs to make the boiler, then the steam launch to put it in.
Brian
|
|