|
Post by steamjohn248 on Dec 1, 2004 22:48:24 GMT
Hi all you 5" men. Have built a few successful 7 1/4" turnouts but am now building some dual guage. I have been working to the 7 1/4" society track standards but cannot find anyone among my M.E. friends who can give the equivalent set of figures for 5" trackwork. I assume there is a standard published in the same way as the 7 1/4", can anyone tell where to look, (I need to know the flangeway and the check guage) or put the figures up on this site.
Thanks Guys.
|
|
|
Post by the_viffer on Dec 2, 2004 9:00:12 GMT
Try www.malden-dsme.co.uk go to "members' only area" log in as guest (you don't need to bea Malden DSME member but don't let me stop you) and you should find a section on gauge standards.
|
|
|
Post by steamjohn248 on Dec 2, 2004 23:12:40 GMT
Thanks for the info, that is some website, most impressive, now in favourites
steamjohn
|
|