Myford Industrial Stand

new

« Prev
1
Next »

Tony K
Elder Statesman

Posts: 1,573

Myford Industrial Stand Feb 6, 2008 9:04:44 GMT

Quote

Post by Tony K on Feb 6, 2008 9:04:44 GMT

Can anyone let me have a wiring diagram for the Myford 3 phase industrial stand please.

It is not difficult to trace out - but my one has been got at and it would be nice to know what it SHOULD be like!

Includes no-volt contactor, on/off buttons, forward/reverse, suds pump etc. in 3 phase.

Thank you.

Last Edit: Mar 3, 2008 17:45:16 GMT by Tony K

Never trust anyone who says "Trust Me!", anyone who talks about 110%, a level playing field, win-win, Heads-up, Milestone, Ramp-up, Intellectual Property, low-hanging fruit or Maintaining Traction!

Myford Matt Statesman There are two ways to run a railway, the Great Western way, and the wrong way. Posts: 621	Myford Industrial Stand Feb 8, 2008 20:29:52 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Myford Matt on Feb 8, 2008 20:29:52 GMT Hi Tony This is all I could find, see pp14-16: www.pilotltd.net/super7.pdf This is quite handy too: www.lathes.co.uk/page27.html Hope that helps; if not, a call to Myford would probably sort it. Matt
	Currently building LBSC 'Pansy' GWR 57xx 0-6-0T, ME beam engine and assorted Hemingway kits. Myford Super 7, Centec 2A mill and Fobco pillar drill.

Myford Industrial Stand

Post by Tony K on Feb 6, 2008 9:04:44 GMT

Post by Myford Matt on Feb 8, 2008 20:29:52 GMT