|
Post by ron61630 on Sept 29, 2023 18:00:53 GMT
Has anyone got the MEs that have these series
Need to know to dimensions of the tender wheels esp the thickness at the centre. His measurements of his B1 look a bit too big
He show them as flange 3/32 flange to rim 9/16 making total of 21/32 However he says to rear of wheel to face of boss is 11/16 making the boss only 1/32
Yet his drawing appears to show the boss as being about 1/8
So if anyone has Vol 142 for Super Claude and 172 for the B12 Eastern Belle would bre grateful for any into
Pm off list if you want
TIA
|
|
millman
Part of the e-furniture
Posts: 297
|
Post by millman on Sept 29, 2023 18:17:54 GMT
Unfortunately what Martin Evans drew and wrote are two different things, I am sorry I cannot help as during Covid I cleared out all my old magazines.
|
|
|
Post by ron61630 on Sept 29, 2023 22:38:39 GMT
Thanks
no worried about the words just need the measurements of both tender wheels if possible I cannot remember what drawing i used...lol
|
|
|
Post by thumpersdad on Oct 1, 2023 19:30:31 GMT
The thickness of the central boss of the Eastern Belle tender wheel is given in Model Engineer as 0.687", 11/16 I suppose.
If you would like scans of the article, please PM me your email address.
Eric
|
|