|
Post by baggo on Apr 5, 2008 9:13:42 GMT
The latest copy of ME dropped through the letterbox this morning and I've just settled down to have a read. It would appear that pages 431 to 438 and 455 to 462 are missing and pages 439 to 446 are duplicated Is everyone elses copy the same or is it just me John
|
|
|
Post by ron on Apr 5, 2008 9:19:58 GMT
John, mine's OK, I think you maybe have a copy of the Muddle Engineer Ron
|
|
|
Post by AndrewP on Apr 5, 2008 9:31:37 GMT
Favouritism, that's what I call it, I'll have to wait till next Friday for mine - that's what I get for supporting local businesses
|
|
|
Post by baggo on Apr 5, 2008 9:44:44 GMT
Thanks Ron,
I'll get in touch with them and get them to send me another one (hopefully!)
John
|
|
|
Post by 3405jimmy on Apr 5, 2008 21:27:29 GMT
Yep mine is the same as baggo's
|
|
|
Post by ausdan on Apr 5, 2008 22:44:49 GMT
I often read my magazines more the twice, but building this in at the design level ?? ;D ;D
|
|
|
Post by davidmew on Apr 10, 2008 9:39:38 GMT
Hi There Magicalia are aware of this problem. At this stage, it looks like a small number of copies have been misbound by the printers.
If you have a dud issue, please email customer.services@magicalia.com for assistance.
This is unlikely to affect newsagents sales as for some, unknown to me, reason there is a seperate print run for subscibers and for newsagents.
I suggest that if buying in a newsagent, you open the bag and check the magazine before purchasing. It is just bad luck that this issue is bagged.
regards David
|
|
|
Post by baggo on Apr 10, 2008 15:13:29 GMT
Thanks David, I emailed them earlier in the week and they are sending another copy John
|
|
|
Post by AndrewP on Apr 11, 2008 9:08:49 GMT
|
|
|
Post by davidmew on Apr 12, 2008 7:52:12 GMT
Hi There I should have mentioned, so there is no confusion, I am David Clark, Editor of Model Engineers' workshop. Not to be confused with the other David. I posted the reply about Magicalia at the suggestion of customer services. Richmond, have a look at this link, it might help you with your CNC conversion. regards David www.fieldofcows.com/tcl125_diary.html
|
|
Richmond
Seasoned Member
My engineering is like this avatar : Projects start off ok, then go off track :D
Posts: 128
|
Post by Richmond on Apr 12, 2008 9:11:36 GMT
Shhhhhhhhhhhhhhh, that was supposed to be a secret !!!
|
|