|
Post by durhambuilder on Sept 9, 2009 19:38:23 GMT
There is lots of guidance on minimum radius's but mostly on rigid wheelbases, My 5" garden railway will have 28ft inside radius curves, fine for my Ajax but I'm wondering about the next loco and fancy a tender engine. I've always liked the LBSC Maid of Kent or the Martin Evans Super Claud would either of these cope with the curves?
Thanks
|
|
ewal
Part of the e-furniture
Happiness is a good wife & a steam engine.
Posts: 293
|
Post by ewal on Sept 10, 2009 19:18:51 GMT
My garden railway is 7 1/4" with 18ft radius & 1 13ft radius curves.At the moment I am running Tinkerbell & Sweet William type locos.
E.W.
|
|
|
Post by havoc on Sept 10, 2009 19:40:21 GMT
Isn't it something like the minimum radius should be 20 times the fixed wheelbase?
|
|
Deeja
Seasoned Member
Posts: 131
|
Post by Deeja on Sept 14, 2009 1:12:55 GMT
Have a look at www.smex.net.au and go to the Reference section and click on the Minimum Radius calculator and have a play for some guidance Deeja
|
|