Alan
E-xcellent poster
Posts: 234
|
Post by Alan on Aug 19, 2013 20:15:55 GMT
Good evening all
Could some suggest where I might purchase a dial indicator with a rear type plunger ?
Or if some one has one to sell I would be interested
Regards Alan
|
|
SteveW
Elder Statesman
Posts: 1,399
|
Post by SteveW on Aug 19, 2013 23:54:50 GMT
Alan, Try these guys: Chronos DTI page Usual get out of no connection but have used this lot. I didn't see one with the rear plunger but maybe one of the little lever type might do, I've found these complement the simple type well. Maybe get one anyway and don't forget a clamping system. I have a rear plunger type and find it a bit sticky. I've had it apart and there's no mystery in there, just a wedge to transfer the push through 90 degrees.
|
|
|
Post by bobpendleton on Aug 21, 2013 3:58:41 GMT
Good evening all Could some suggest where I might purchase a dial indicator with a rear type plunger ? Or if some one has one to sell I would be interested Regards Alan Hi, Alan Maybe Toolbox at Colyton, Devon can help? One has just appeared on their 'recent arrivals' page www.thetoolbox.org.uk/late_arrivals/metalworking.htmlBob
|
|