|
Post by chameleonrob on Sept 24, 2004 13:00:34 GMT
just quick one, what are the pros and cons of using mild steel are a cyylinder material? for me it is easier to get hold of and fabricate (not using castings, loco will be all my design). Is it a big nono, inadvisable or OK? thanks in advance
|
|
|
Post by Tel on Sept 24, 2004 20:49:52 GMT
ms is ok, but you have to be mighty particular with the lubrication. Better to make up your ms fabrication & then install a bronze or CI liner.
|
|