Lee
Involved Member
Posts: 95
|
Post by Lee on Jul 4, 2007 9:02:06 GMT
I am travailing to Bendigo VIC for this weekends Bendigo Society's model engineering exhibition. I intend to take a few photos and post a link to them here when I get home. If there is any other members of this forum going I will be wearing my modeleng.org badge grab me and say hello.
Lee
|
|
|
Post by stantheman on Jul 4, 2007 9:12:24 GMT
Sorry Lee, I am flying West on Saturday from the UK to Ontario so can't make Bendigo. The Richmond Hill Live Steamers are holding the first of the two weekend meetings they hold every year. Always a good couple of days out, despite the jet lag! The friendship of model engineers certainly spans the globe, pity other factions are not the same. Stan.
|
|
jock
Active Member
Posts: 13
|
Post by jock on Jul 4, 2007 10:40:36 GMT
Hi Lee I'll be there as I am a member of the the Bendigo society of Model Engineers. The exhibition will be held in Bendigo at the Kangaroo Flat Leisure Centre on the 7th 8th July. For more info you cancontact me on 0408509829 Jim Stein
|
|
jock
Active Member
Posts: 13
|
Post by jock on Jul 4, 2007 10:41:28 GMT
Stan Bendigo is only a small detour ;D Jim
|
|
|
Post by stantheman on Jul 5, 2007 4:27:34 GMT
Thanks for pointing that out to me Jim. I will see if I can arrange something next time.
Stan.
|
|
Lee
Involved Member
Posts: 95
|
Post by Lee on Jul 10, 2007 22:40:12 GMT
|
|
steam4ian
Elder Statesman
One good turn deserves another
Posts: 2,069
|
Post by steam4ian on Jul 10, 2007 23:00:15 GMT
G'day Lee.
Thanks for the pictures. Was there any steam locos or traction engines operating?
Regards, Ian
|
|
Lee
Involved Member
Posts: 95
|
Post by Lee on Jul 11, 2007 9:15:21 GMT
Ian Ian I was surprised that there were very few locos and only one part built traction engine. A lot of engines were running on air. The Cirrus engine was the only I / C engine I seen running ( ran beautifully smooth and quite)
Lee
|
|