|
Post by quiksilveralex on Jul 4, 2007 11:37:09 GMT
Hey I’m new to the forum ;D Before I ask my question I tell you little about me well I’m 16 and from the UK and currently building a 3 1/2 inch TICH by LBSC. I have a great interest in mechanical engineering and hope to continue this passion in to my career. Currently I have a complete running chassis and have just finished making the boiler but my question is: What should I use to remove the Flux and clean the boiler and where can it be obtained from? I have heard that some drain cleaners can be used Thanks Alex
|
|
waggy
Statesman
Posts: 744
|
Post by waggy on Jul 4, 2007 11:45:37 GMT
Welcome, Alex,
Have a look on page 2 of this forum, lots of info under the "Pickling" heading.
Waggy.
|
|
|
Post by quiksilveralex on Jul 4, 2007 11:48:49 GMT
Hey
ooo sorry didnt realise there was another page my bad
Thanks
|
|
|
Post by chameleonrob on Jul 4, 2007 17:24:39 GMT
Hey ooo sorry didnt realise there was another page my bad Thanks try 37 pages! the search works as well, if you reset the time frame the is searched. rob
|
|