|
Post by Andy Clark on Jul 6, 2007 13:41:02 GMT
Hi All I am delighted that there is such a rich set of material published in our forums now. I for one have found a variety of helpful tips on buying a milling machine (more of that later). I would like to consolidate some of the broader knowledge in the form of published articles - I already have a home for these at www.modeleng.org/articles.htm but it hasn't been updated in years. If any of you would like to submit articles or reprints that you think are of interest to the community and can be published within copyright constraints please will you send them to me by email at modelinfo(at)modeleng.org Thanks Andy
|
|
|
Post by Andy Clark on Aug 10, 2007 12:19:10 GMT
Hi All I am delighted that there is such a rich set of material published in our forums now. I for one have found a variety of helpful tips on buying a milling machine (more of that later). I would like to consolidate some of the broader knowledge in the form of published articles - I already have a home for these at www.modeleng.org/articles.htm but it hasn't been updated in years. If any of you would like to submit articles or reprints that you think are of interest to the community and can be published within copyright constraints please will you send them to me by email at modelinfo(at)modeleng.org Thanks Andy The silence was deafening
|
|
jones
Active Member
Steam loco's and IC engines
Posts: 41
|
Post by jones on Aug 10, 2007 12:33:49 GMT
I have a few articles scanned from Model Engineer and from all over the internet but I am sure they are covered by copyright (at least the ME ones are)
|
|
|
Post by AndrewP on Aug 10, 2007 13:32:59 GMT
Andy I suspect that most, like me, have read the learned articles and decided that our own efforts would appear feeble alongside.
Personally I have done very little that is unique and those that are comprise modifications to my C1 lathe whicch would be of interest to a very small audience.
Cheers, Andy
|
|
|
Post by Shawki Shlemon on Aug 15, 2007 9:33:53 GMT
Hi Andy I was away for a while and now I am catching up . I designed two items for my locos ( a 5" regulator and Garratt Steam coupling )both these items are published on this forum and also are on my web site on page -7 .I also put on this forum a thread , I thought will help beginners on how to bore cylinders between centres using home made tools .If you think they are good enough for pouting on your site , I will be pleased to send them to you .If you want to download them from this site or my website is up to you .This is my work ,there is no problem of copy write .
|
|