Post by waggy on Oct 29, 2004 15:40:51 GMT
I have discovered a major dimension eror on the drawing for M.Breezes 5" Duchess. The leading horns are shown as 23/32" wide, thinner than the middle and trailing horns. This dimension should be 19/32 including the frame thickness. If you adhere to the drawing, your crank axle will not fit between the horns, it will be .25" too wide. The crank is right, the horns are wrong. I was fortunate, a visit to the mill using a new end mill sorted the problem, others may not be that lucky. 
