|
|
Post by codger71 on Oct 6, 2017 6:33:59 GMT
I have a three and a half inch gauge Britannia, can anyone offer help re number, spacing and size of the smokebiox rivets, thanks in advance
|
|
|
|
Post by springcrocus on Oct 6, 2017 18:20:15 GMT
John B. (simplyloco) might have been able to help but I think he's swanning around somewhere in sunny Spain at the moment. Mine is 5" but I will try to scale down for you if no-one else comes forth with the required.
Regards, Steve
|
|
|
|
Post by codger71 on Oct 6, 2017 19:12:23 GMT
Many! thanks Steve, I would appreciate the help if you would be so kind
|
|
|
|
Post by simplyloco on Oct 7, 2017 9:16:15 GMT
John B. (simplyloco) might have been able to help but I think he's swanning around somewhere in sunny Spain at the moment. Mine is 5" but I will try to scale down for you if no-one else comes forth with the required. Hi Steve IIRC 3/64" dia. 18 rivets per 90 degrees = 72. Our friend can zoom in and count them like wot I did! John Sunny South of France, home on 18/10.  DSCF0019 by inkaboat, on Flickr |
|
|
|
Post by springcrocus on Oct 8, 2017 8:26:11 GMT
John B. (simplyloco) might have been able to help but I think he's swanning around somewhere in sunny Spain at the moment. Mine is 5" but I will try to scale down for you if no-one else comes forth with the required. Hi Steve IIRC 3/64" dia. 18 rivets per 90 degrees = 72. Our friend can zoom in and count them like wot I did! John Sunny South of France, home on 18/10. You didn't fancy Barcelona, then?   regards, Steve |
|
|
|
Post by springcrocus on Oct 8, 2017 8:49:02 GMT
Here you go, Codger71, you should be able to adjust from this.  Just multiply by 0.7 to get your scale. Probably 3/64" rivets on 7/32" pitch. Regards, Steve |
|
