timb
Statesman
Posts: 512
|
Post by timb on Aug 8, 2018 14:44:07 GMT
Hi all,
Just purchased one of these beauties from the infamous auction site with a view to using it as a small press brake. On stripping it down to remove rust and repaint/lube etc., I have found the hardened steel pad missing which is between the main screw and the ram. I am hoping someone can give me dimensions for this item, it looks like it ought to be about 1/2" length x 1" dia round bar hardened steel. Spares are available but I cannot bring myself to fork out £18 for such a small lump of steel. If anyone can help I would be very grateful!
|
|