|
|
Post by westlin on Dec 26, 2018 20:54:50 GMT
I cant see on any of the spinks drawings the positions for the stays that go in the side of the firebox ( it does show the throat plate ones). Can any one assist with a diagram with measurements.
Thanks
|
|
|
|
Post by Jim on Jan 9, 2019 9:23:43 GMT
I'll have a look at my boiler drawings if it's any help. It may take a day or so if that's ok.
Jim
|
|
|
|
Post by westlin on Jan 9, 2019 10:07:13 GMT
Jim
That's great
Thanks
Stephen
|
|
|
|
Post by Jim on Jan 9, 2019 17:54:26 GMT
Hi Stephen,
I built the boiler for Boadicea to the Australian Miniature Boiler Standards (AMBSC) and it has been pressure tested to 200psi and passed. Boadicea is based on the Jean Perrier's drawings which I believe is the basis for the Spinks drawings.
I'll send you the details of both JP's boiler details and my AMBSC based drawings via a PM.
I guess you have seen the thread on building 70036 Boadicea:
Jim
|
|
|
|
Post by Jim on Jan 9, 2019 23:11:05 GMT
Hi Stephen,
Just sent you a PM with the stay details.
Jim
|
|
