|
|
Post by bungler51 on Jan 27, 2019 1:50:44 GMT
Hi all,I was a member years ago,when i was a member of a model engineering club. Through various circumstances,I had to give up,and sell my lathe and mill. I have renewed interest in small scale metalwork,and to this end bought a 7x12 mini lathe a couple of years ago. It has been sitting around,with very little work done. I have become involved with 1/87 scale radio control vehicles,which require of course very small parts and tooling. Hence my renewed interest. Hans.
|
|
timb
Statesman
Posts: 512 
|
Post by timb on Jan 27, 2019 9:07:28 GMT
Welcome Hans, hope you find these pages of use!
Tim
|
|
barlowworks
Statesman
Now finished my other projects, Britannia here I come
Posts: 878
|
Post by barlowworks on Jan 27, 2019 23:41:16 GMT
Hi Hans
1:87, isn't that about 4mm scale. They must be tiny. I'd love to see some of your work.
Mike
|
|
|
|
Post by Deleted on Jan 28, 2019 17:12:58 GMT
Hi Hans...
Welcome back, I have seen some small scale (O gauge) working vehicles on the RMweb forum, very impressive. Must be even more so in your chosen scale which is approx half as small again...
Regards
Pete
|
|
