|
|
Post by safetychap on Mar 10, 2020 20:02:32 GMT
Hi all from a returning model engineer. slowly getting my man cave organised lathe check bench drill check grinding section check mill to be procured
my plan is to eventually build a LBSC 2 1/2 inch gauge Dyak and to that end im slowly purchasing the castings and basic metal. and i am relearning / learning the techniques i will need
|
|
uuu
Elder Statesman
your message here...
Posts: 2,857
|
Post by uuu on Mar 10, 2020 20:14:30 GMT
Well hello! 2 1/2 inch eh? That's quite exciting. If you can devote the time to a build thread, it would be well received, I'm sure.
Wilf
|
|
JonL
Elder Statesman
WWSME (Wiltshire)
Posts: 2,988
|
Post by JonL on Mar 13, 2020 21:20:39 GMT
An unusual size! I hope you have somewhere to run it. Welcome, and we would love to see your progress.
|
|
|
|
Post by safetychap on May 22, 2022 12:24:34 GMT
sorry for not replying sooner real life got in the way with house extension patio and swwmbo wanting garden landscape work doing
i will start a thread on my dyak in the next day or so
|
|
dalboy
E-xcellent poster
Posts: 235
|
Post by dalboy on May 22, 2022 16:49:08 GMT
sorry for not replying sooner real life got in the way with house extension patio and swwmbo wanting garden landscape work doing i will start a thread on my dyak in the next day or so The big question is a track around the garden part of the landscaping  .Look forward to seeing the build |
|
|
|
Post by safetychap on May 22, 2022 21:05:59 GMT
Lol I wish, No my local club Rugby model Engineering has a 2 1/2 " track
|
|
.Look forward to seeing the build