Post by lankyyorky on Oct 30, 2020 21:33:45 GMT
Hi all,
Having recently liberated a few moths from my wallet and bought a Phrozen Sonic Mini I printed a test rectangle of 100 x 60 mm which came out at 100.75 x 60.68 mm with Syraya tech blue, not a problem for war gamers but if you want parts that fit not good enough.
Browsing the web brought up this:
Using the method shown a profile was created in Chitubox with X= 68.811, Y= 121.867 in the settings tab which gave results within 1-2 microns.
Don't forget to unlock the ratio button when entering figures.
Hope this helps, you can use the same method for any printer afaik.