Post by martyn1936 on Jul 29, 2024 14:15:07 GMT
I am looking for some advice please.
I have built a 7 1/4" scale Santa Fe CF7 switcher together with a Caboose from photographs and have finally got the gearing correct so that I can now move on to the fun bits.
I was able to source from the USA a sound card for the EMD diesel engine which also gives me the horn sound and that is very satisfactory.
What I am now looking to add is some smoke from the 4 exhausts, not a lot but just enough to be realistic when pulling away.
There are several on the market for Gauge 1 but I obviously need something bigger than those.
If anyone has done this I would be very grateful for any advice or source for such a device.
Regards, Martyn
I have built a 7 1/4" scale Santa Fe CF7 switcher together with a Caboose from photographs and have finally got the gearing correct so that I can now move on to the fun bits.
I was able to source from the USA a sound card for the EMD diesel engine which also gives me the horn sound and that is very satisfactory.
What I am now looking to add is some smoke from the 4 exhausts, not a lot but just enough to be realistic when pulling away.
There are several on the market for Gauge 1 but I obviously need something bigger than those.
If anyone has done this I would be very grateful for any advice or source for such a device.
Regards, Martyn