Y4 Loco Frame

new

« Prev
1
Next »

peter99
Involved Member

Posts: 53

Y4 Loco Frame Sept 14, 2024 7:26:10 GMT

Quote

Post by peter99 on Sept 14, 2024 7:26:10 GMT

Hi Martian, Re your post regarding the Y4 Loco Main Frame plate thickness mine is 1/8 inch but I have a spare bare main frame as it was purchased with a boiler as a guy was selling up due to bad help. You are quite welcome to it for collection for a nominal price at SE London UK. If interested please contact me. It would need a clean up a and I believe it was made up from laser cut plates supplied by Doug Hewson. I cannot vouch for it's accuracy of build.

martian
Member

Posts: 2

Y4 Loco Frame Sept 20, 2024 19:39:44 GMT

Quote

Post by martian on Sept 20, 2024 19:39:44 GMT

Hi Peter, I'm sure I asked the question in a different forum. Thanks for the offer but I have already purchased some steel.

Do you know where I could find the old 'Blackwall' drawings by Ron Bray, I'm only really interested in the axle driven feed pump and eccentric as I have the castings for it and thought I might use them instead of a second injector.