Frits
Active Member
Posts: 10
|
Post by Frits on Jan 25, 2005 21:10:52 GMT
Hi Andy, If you have a gauge 1 group in the forum, could you also install a gauge 5" group in your forum.  I would like to post and read there. And who knows are there some members with the same idea? Would appreciate your efforts.  Frits |
|
SteveW
Elder Statesman
Posts: 1,456
|
Post by SteveW on Jan 28, 2005 0:00:35 GMT
Guys,
I would tend to agree with the above. A while back I suggested that there be a thread on stationary engines and, behold there was one.
Time has moved on and there has been very little action there.
If a 5" Gauge is a goer then surely a 7-1/4" should be considered. However, based on previous experience I would guess there would be very little action on either.
At the end of the day if its there someone will use it when they need to.
|
|
|
|
Post by Blackadder on Jan 28, 2005 7:34:38 GMT
if you have 5inch and 7 1/4 inch then you need 3 1/2 inch ect as well
why not make one forum for engine builders , not engines asembled from kits
|
|
Frits
Active Member
Posts: 10
|
Post by Frits on Jan 28, 2005 9:31:51 GMT
Hi, It was just a suggestion for my own benefit, sorry.  But you were right. You must split up for everyone or we all post on a big stack. The problem is then that you must detect the contents of the posting by reading the title.  The result is you read them all and after sometime you lost interest.  Who makes a wise decision? Frits |
|
Frits
Active Member
Posts: 10
|
Post by Frits on Jan 28, 2005 9:43:21 GMT
Morning, What about this possibility? All your postings has a preset in their topic, which indicate the catagory they belong too. ;D ;D Mine will be mostly called 5" gauge ............  Frits |
|
|
|
Post by 3405jimmy on Jan 28, 2005 19:53:49 GMT
Seems we hardly exhaust our eyes with what is posted here so diluting it with sub sections seems a bit counter productive to me.
Jim
|
|
