Cross Drill Jig

robhk Member Posts: 4	Cross Drill Jig Dec 23, 2006 8:31:56 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by robhk on Dec 23, 2006 8:31:56 GMT Hello All, Someone asked about a cross hole jig..... My cross-drilling jig I made - uses commercial bushes or ones made from hardened silver steel. A Merry Christmas to you all.

Laurie_B
Statesman

Posts: 508

Cross Drill Jig Dec 23, 2006 11:20:20 GMT

Quote

Post by Laurie_B on Dec 23, 2006 11:20:20 GMT

That looks a very handy item.Think I might make one.Is it to your design?
At the moment I make a separate,drilled bush the same diameter as the piece to be cross drilled,then fiddle about setting up the bush and workpiece in a drill vice.A jig would save all that.

Built a Tubal Cain 'Trevithick' engine (as the 'Catch Me Who Can' loco).
Building GWR 5101 class tank loco,and a 5" gauge BR Standard Class 2 tender loco.
Planning a 'Large' Metro.

robhk Member Posts: 4	Cross Drill Jig Dec 23, 2006 19:37:57 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by robhk on Dec 23, 2006 19:37:57 GMT Laurie_B, It's a hash-up of several ideas - will do some drawings of it and upload them as a PDF if you like..... It really works fine. robhk

Post by robhk on Dec 23, 2006 8:31:56 GMT

Post by Laurie_B on Dec 23, 2006 11:20:20 GMT

Post by robhk on Dec 23, 2006 19:37:57 GMT