|
|
Post by Scaramanga on May 30, 2006 22:02:01 GMT
Hello fellow engineers, I have just moved to South West Scotland and wondered if anybody knew of any model engineering clubs in the area I have not been successful finding any from the local library but who knows someone out might know of a secret one?  I would appreciate any info of course, thank you.  |
|
|
|
Post by alanstepney on Jun 5, 2006 1:26:36 GMT
|
|
|
|
Post by mitlargs41 on Jul 2, 2006 20:47:30 GMT
The Strathaven Society is in South Lanarkshire not far off the M74. Their Secretary is Martin Simpson who can be reached on <martin.simpson at blueyonder.co.uk> Their website is mysite.wanadoo-members.co.uk/strathaven_ms. Best Wishes |
|
|
|
Post by richie on Oct 9, 2008 21:24:14 GMT
Hello fellow engineers, I have just moved to South West Scotland and wondered if anybody knew of any model engineering clubs in the area I have not been successful finding any from the local library but who knows someone out might know of a secret one? I would appreciate any info of course, thank you. I'd like to ask the same question but before I do, Good evening all, I have just joined and have lots of questions to ask, I have just purchased a "Warco" mini lathe, does anyone out there have one? and is there anyone near me in Reading, Berks? Regards, Richie. |
|
|
|
Post by mutley on Oct 9, 2008 21:30:27 GMT
|
|
|
|
Post by spug103 on Oct 9, 2008 21:55:57 GMT
If you are into locos pinewood near bracknell has a brilliant club with a great track, this is where i was taken by my dad as a little boy so have very fond memories of riding on the various trains through the woods.
regards
Ben
|
|
|
|
Post by Nexuas on Oct 10, 2008 15:39:24 GMT
I'd like to ask the same question but before I do, Good evening all, I have just joined and have lots of questions to ask, I have just purchased a "Warco" mini lathe, does anyone out there have one? and is there anyone near me in Reading, Berks? Regards, Richie. RSME is a great club, very friendly, very welcoming. 3 1/2" - 5" raised track 5" - 71/4" ground level. It is our club running session this Saturday, from about 11am onwards come down and introduce yourself... I maybe there running my 3 1/2" RUSSELL, but I may go to the Malden visiting clubs day for a run there instead. I am off for major surgery next week so will not be around for a while but I am sure they will look after you. |
|
|
|
Post by mutley on Oct 10, 2008 15:48:12 GMT
I'll look out for you at Malden Nexus. Anyone else going this weekend?
Andy
|
|
|
|
Post by Nexuas on Oct 10, 2008 16:12:19 GMT
do you know what time things start?
|
|
|
|
Post by mutley on Oct 10, 2008 19:00:58 GMT
10am start approx. 1700 fininsh.
Andy
|
|
|
|
Post by Nexuas on Oct 11, 2008 17:45:36 GMT
10am start approx. 1700 fininsh. Andy Good to see you today, just a shame my engine did not want to play ball, I did not go back out on the track with it after you left. But I did get a play with 85!!! An awesome piece of kit!!! |
|
|
|
Post by mutley on Oct 11, 2008 18:56:32 GMT
Hi Nexuas
Good to see you and Russell again, Ive sent you a PM.
Andy
|
|
|
|
Post by Nexuas on Oct 27, 2008 9:08:46 GMT
I am alive, back home and a bit sore, will not be running the loco for a while, but I think the OP has been a success...
|
|
|
|
Post by mutley on Oct 27, 2008 10:19:04 GMT
well come back Russell. Good to hear your feeling positive.
Andy
|
|
