Richmond
Seasoned Member
My engineering is like this avatar : Projects start off ok, then go off track :D
Posts: 128
|
Post by Richmond on Oct 20, 2007 13:56:00 GMT
Hi,
We all use tools and tooling.....Would it be possible to have a category specifically for these, and the discussion thereof ?
Eg design and construction of Dividing heads, grinders, ball tools, etc etc etc
Just a thought ??
Rgds
|
|
|
|
Post by AndrewP on Oct 20, 2007 22:29:12 GMT
Gets my vote, if a vote is needed.
|
|
Richmond
Seasoned Member
My engineering is like this avatar : Projects start off ok, then go off track :D
Posts: 128
|
Post by Richmond on Oct 22, 2007 9:23:23 GMT
Hi,
There havent been many responses despite 90 odd viewings. Do the board administrators need to vote, or have an overwhelming request from members ?
Perhaps an administrator could reply to this post and ask if people are interested, as well as advise what the process would be.....that is if it is possible to add another category.
Rgds
Richmond
|
|
waggy
Statesman
Posts: 747
|
Post by waggy on Oct 22, 2007 9:40:19 GMT
Probably a good idea, the general chat is crowded, a forum for tooling might thin it out a bit? Waggy.  |
|
Myford Matt
Statesman
There are two ways to run a railway, the Great Western way, and the wrong way.
Posts: 621
|
Post by Myford Matt on Oct 22, 2007 9:55:17 GMT
Good idea!
MM
|
|
klank
Involved Member
Robinson's Locos - Edwardian elegance at its best.
Posts: 87
|
Post by klank on Oct 22, 2007 10:18:45 GMT
Excellent idea.
Should be really useful information for beginners and those "newer" to engineering.
Regards
Peter
|
|
steam4ian
Elder Statesman
One good turn deserves another
Posts: 2,069
|
Post by steam4ian on Oct 22, 2007 13:01:53 GMT
G'day all.
If you are looking for support for a specific category for tools etc then count me in. As has been said It will thin out the general chat.
BTW, I am surprised there is not more activity regarding Infernal Combustion and Hot Air.
Regards,
Ian
|
|
Myford Matt
Statesman
There are two ways to run a railway, the Great Western way, and the wrong way.
Posts: 621
|
Post by Myford Matt on Oct 22, 2007 13:04:38 GMT
Plenty of hot air :-)
|
|
|
|
Post by mmaidnz on Oct 22, 2007 21:33:15 GMT
good idea! Toolporn.  .Yuuuuuuuum. |
|
abby
Statesman
Posts: 927
|
Post by abby on Oct 23, 2007 11:49:02 GMT
Why have another category? this site is about model making and all related posts should be of interest ! from the frequency of the posts the whole of this site could be under one heading as there is rarely one new thread per week and some of the categories have had no posts in months. Following a heated debate regarding the posting of "adverts" on another forum that I visit , I have opened a forum where you can advertise , whether commercial or not , free of charge. It is my hope that small manufacturers and shed dwellers will post details of their products and services. www.unionsteam.co.uk/forum |
|
|
|
Post by Andy Clark on Oct 23, 2007 15:38:35 GMT
Done - as you can see
Andy (in Oz at present - sadly missed seeing Tel this trip - have to do it again!)
|
|
Richmond
Seasoned Member
My engineering is like this avatar : Projects start off ok, then go off track :D
Posts: 128
|
Post by Richmond on Oct 23, 2007 22:16:24 GMT
HI, Great Thanks very much |
|
|
|
Post by jenny on Oct 29, 2007 13:10:52 GMT
I am also very interested in!
|
|
|
|
Post by spurley on Nov 1, 2007 9:05:39 GMT
In........................?
|
|
|
|
Post by drjohn on Nov 1, 2007 10:44:25 GMT
Well all this blurb is fascinating .... but what about describing your tools ... sorry, tooling?
|
|
.Yuuuuuuuum.
