|
|
Post by spurley on Nov 15, 2008 16:17:39 GMT
Hi all
Has any member of the forum got a set of wheel jigs for the 1" Minnie they'd be prepared to loan out or maybe sell?
I am in no particular rush for these, I'm just 'testing the water'.
Cheers
Brian
|
|
jasonb
Elder Statesman
Posts: 1,236
|
Post by jasonb on Nov 15, 2008 16:48:12 GMT
You don't need anything special, just a couple of scraps of MDF 9-12" square Bore a hole in one to fit the rim and fix to the other. Then turn up a simple spigot to hold the hub and a spacer for when you flip it over to get the offset.
I've not got mine anymore. But can take a pic of the one I recently used for the fronts of my 2" Fowler
Jason
|
|
|
|
Post by baggo on Nov 15, 2008 19:45:45 GMT
Noticed these on Ebay this morning Brian: Item No.190266864171
John
|
|
|
|
Post by spurley on Nov 15, 2008 21:31:14 GMT
Thanks John, to be honest that's what inspired me to ask the question.
I have them on watch so I'll be able to decide nearer the time whether to buy!
Cheers
Brian
|
|
|
|
Post by dogioio on Nov 16, 2008 17:48:56 GMT
Hi Brian
I think I have a set of jigs for wheel fab also for spoke drilling You are welcome to these if you wish
Regards Roger
|
|
|
|
Post by spurley on Nov 16, 2008 21:16:50 GMT
Hi Roger
PM sent.
Cheers
Brian
|
|
|
|
Post by spurley on Nov 25, 2008 21:13:42 GMT
Hi Roger Thanks very much for sending the Minnie jigs, the package arrived on Saturday. It was very generous of you and is much appreciated. I meant to call you but I am presently in Sumburgh with no phone signal  Be home at the weekend. Cheers Brian |
|
Be home at the weekend.