10 V Face plate problem

[miniburrell]

Hi All, my stuart 10V is well on the way, and i am now at the stage where i need to fix the standard to the faceplate. In the build guide it recomends to make two v shaped plates to be bolted on to the legs of the standard, what material do you recomend i make these from, and if has any one got any spare from thier builds and are willing to part with them , let me know

Many thanks, and mery christmas

MB

[jasonb]

A couple of strips of 1/4x1" about 2" long would do. Hole in the middle for your T nut/bolt and tap the oposite end for a jacking screw M6 or 1/4" .Think I just used a couple of standard clamping blocks when I did mine many years back.

Jason

[lancelot]

Hi M.B....Jason has it right...but watch your set up, centre the
standard using the pitch circle centre for the Cylinder fix...and easy does it ;D
All the best with the build,
John.

[jeff02]

This might Help!!!
www.modelstoom.nl/stuart_10v.htm

[matchbox]

An 'English' translation can be found at:

translate.google.com/translate?js=n&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fwww.modelstoom.nl%2Fstuart_10v.htm&sl=nl&tl=en&history_state0=

Brian