Post by Workshopshed on Jan 6, 2009 10:44:52 GMT
Here's some pictures of a flea chariot I made over the last week. The axle and front hook were silver soldered to the base and the top and wheels were soft soldered. The wheels do go round but it has a tendency to skid as there is little grip on them.
It's going to be mounted on an old coin in a small glass domed case.
Wheels
Test fitting before soldering and before hook was made
Just finished
It's going to be mounted on an old coin in a small glass domed case.
Wheels
Test fitting before soldering and before hook was made
Just finished
