Alan
E-xcellent poster
Posts: 234
|
Solder
May 18, 2009 9:15:17 GMT
Post by Alan on May 18, 2009 9:15:17 GMT
Good Morning Chaps
Can anyone give me advice on "Solder" I want to solder an inlet stub and a transfer port to the cylinder of my Sparey 8cc diesel that I am making. The trouble is I want to have something stronger tnat normal solder but at the same time does not take the heat needed for silver braze. Thanks again in advance Alan
|
|
|
Solder
May 18, 2009 10:10:22 GMT
Post by metalworker on May 18, 2009 10:10:22 GMT
Try Comsol, it is a high temp soft solder which used to be used for caulking steam boilers. Should be available from the usual M.E. suppliers
|
|
Alan
E-xcellent poster
Posts: 234
|
Solder
May 20, 2009 15:12:03 GMT
Post by Alan on May 20, 2009 15:12:03 GMT
Advice taken
Thank you very much
Alan
|
|