Ruben
Active Member
Posts: 11
|
Post by Ruben on Jul 14, 2010 13:50:58 GMT
Hi group,
I'm saving drawings to build a Super Simplex 5 "gauge and see that I need construction drawings about wheels.
Anyone know where to get this?
Regards, Ruben
|
|
russell
Statesman
Chain driven
Posts: 762
|
Post by russell on Jul 14, 2010 18:44:38 GMT
Hi group, I'm saving drawings to build a Super Simplex 5 "gauge and see that I need construction drawings about wheels. Anyone know where to get this? Regards, Ruben The wheels for Super Simplex are the same as for Simplex except that the flange diameter is reduced from 4 11/16" to 4.655". Drawings for Simplex can be found on the Model Engineer website www.model-engineer.co.uk/Russell. |
|
Ruben
Active Member
Posts: 11
|
Post by Ruben on Jul 14, 2010 19:49:23 GMT
Thanks Russell
But I am not a subscriber to model, I can not see back issues.
Ruben
|
|
russell
Statesman
Chain driven
Posts: 762
|
Post by russell on Jul 15, 2010 19:15:46 GMT
See PM.
Russell.
|
|
