Burnt shapeless lump

[paul]

Well actually it's my 'slide valve in progress' - I was well chuffed to get it all lined up ;D




Dimensions: 11 x 11mm with a steam 'ole of 6mm x 8mm x 1.5mm deep.

This pic is the work in progress, most of the material will be removed - the hard way!

The write-up is here...

www.artefact-rescue.co.uk/articles/ediary.html

[jgb7573]

That's no burnt shapeless lump! It's definitely a slide valve in the making. Good solution to the slot drill problem Paul. Keep at it.
John

[paul]

Here's the finished article:



I seem to be running two threads about this now so I'll stick to posting on the other one!

[paul]

Oh what the heck, here's a picture of the valve rod fork. Blood, sweat and tears....