|
|
Post by Steve M. W on Nov 1, 2006 20:41:40 GMT
 Hi has anybody got the manual for an Eagle Surface Grinder that I could buy, beg, borrow, copy, pay for a copy or any which way you like. Many thanks Steve PS Well done putting Simplex in its own category 
|
|
|
|
Post by the_viffer on Nov 1, 2006 20:46:30 GMT
Nope can't help you with that but if you'd like a nice Eclipse magnetic chuck for it...
|
|
|
|
Post by Steve M. W on Nov 1, 2006 21:39:38 GMT
:DNope cant help you with that - got one already thanks for the thought
Steve
|
|
wayne
Seasoned Member
Posts: 137
|
Post by wayne on Nov 2, 2006 23:42:10 GMT
I asked the same question 6 months ago and no one could help, acoring to tony @ lathes co.uk no manuals were produced for the grinder.
the tabel travers handle bering is a sod to replace, and required my vast aray of snap on pullers to get the shaft out without damaging it,
the tabel gib strip fine adjuctment still bafels me all it semes you can do is slaken the underside gib strip allen bolts then pull them forward and lock off.
ps the table just takes a 18x6 eclipse magnetic chuck (my grinder came with this fitted).
regards Wayne
|
|
Hi has anybody got the manual for an Eagle Surface Grinder
