|
|
Post by peterhill on Apr 24, 2013 16:02:51 GMT
Have now started on to build my SD tractor, working on the horn plates at this time. It is a good place for me to start, next i hope to work on the front end or tender.
peter
|
|
|
|
Post by albert on Apr 24, 2013 18:10:36 GMT
Hello Peter,
First drawing mistake--2nd shaft to 3rd shaft dimension wrong,allowance made for working springing that is not fitted.
Leave the haystack out,bolt the spectical plates direct to the boiler,it is a stronger way.I fitted it and regretted it.
Albert
|
|
