mw
Member
Posts: 1 
|
Post by mw on Sept 7, 2013 20:27:03 GMT
Hi All,
Has anyone got drawings for the pipe work required for a Stanier 4000 gallon tender. I'm currently building a 5 inch gauge Black 5.
Mark
|
|
|
|
Post by Jo on Sept 12, 2013 9:26:28 GMT
The only drawing that gives any idea of the running is Martin Errors view of the tender for King's Own, which is available in Model Engineer. Don Young's Black 5 drawings don't show the pipe work.
Jo
|
|
greensands
Part of the e-furniture
Building a Don Young 5" Black Five
Posts: 409
|
Post by greensands on Feb 23, 2014 10:28:58 GMT
Hi - Does anyone have the issue numbers for the Model Engineers describing the King's Own tender. Many thanks
|
|
|
|
Post by Laurie_B on Feb 23, 2014 10:45:04 GMT
You might be able to find the relevant issue numbers here |
|
redmog
Part of the e-furniture
Not Morgan weather
Posts: 461
|
Post by redmog on Feb 23, 2014 11:23:33 GMT
|
|
greensands
Part of the e-furniture
Building a Don Young 5" Black Five
Posts: 409
|
Post by greensands on Feb 23, 2014 12:00:42 GMT
Have had a preliminary search but without success. Are we right in assuming that the "Kings Own" is a Martin Evan's design?
|
|
|
|
Post by Laurie_B on Feb 23, 2014 14:43:18 GMT
In the 1970's Martin Evans produced 5"g designs based on the high pressure loco "Fury" and the Royal Scot class.I think the latter went under the title of "Royal Engineer"
The tender was described in M.E. Vol 142,No 3532 in 1976:
Details of the standard L.M.S. 4000 gallon tender for "Royal Engineer", also suitable for the "Rebuilt Royal Scot", the 5XP and 5P5F classes and the 2-8-0s.
|
|
|
|
Post by Deleted on Feb 23, 2014 20:07:30 GMT
Hi Greensands
PM me with your email address, and I'll send you a scan of the article.
|
|
|
|
Post by klendo on Aug 6, 2014 9:46:02 GMT
If its any help I have some drawings for a 5" gauge Clarkson duchess 4000 Gallon tender.
|
|
